Self-Cleaning Strainers Brochure
Self-Cleaning Strainer Parts Breakdown
Older Self-Cleaning Strainer Parts Breakdown (Phased out in the Fall of 1998)
Self-Cleaning Strainer Installation Instructions
View Self-Cleaning Strainer Capacities For Given Through Screen Velocities Chart
Installation Instruction Diagrams:
Standard Self-Cleaning Strainer Installation
Through Screen Velocity Calculator
Drawdown Calculator for wet well applications
Self cleaning strainers are simple to install and operate. The two key points are:
These self-cleaning strainers are perfect for:
Lakes - Ponds - Streams
Debris clogging your pump's intake is eliminated when you install a Sure-Flo SCS2 self-cleaning strainer. Gone are those annoying trips into the water to scrub away leaves, algae, or aquatic plants. Because this screen is always clean, your pump can operate at maximum efficiency. It will provide all the water and pressure it was designed to deliver.
Only 35 PSI is required to operate the strainer.
A small amount of water is returned from the discharge line of the pump to the strainer. Inside, two special nozzles spray against the screen, causing it to revolve. Any debris (i.e. algae, aquatic plants, or leaves) attracted to the screen is blasted off every half revolution. Strainers operate in any position.
 |
 |
| Screen removed to show internal nozzles | SCS2 Plastic Screen |