Sure-Flo accessories can be welded to fittings here at the factory or ordered for on-site fabrication.
(Click on any product image for details)
Klamplock Flanges
Gun Outlets
Tubing Plugs
Companion Flanges
Tube Tees and Els
Pump Support Plugs
Designed for Sure-Flo OD compression type foot valves and fittings Klamplox flanges provide an extra secure connection. The flange is made as a two-piece unit, which clamps on the tubing and prevents it from being pushed out of the fitting under pressure. A separate aluminum gasket-seal-ring assures uniform pressure against the gasket to prevent leakage. Not more than 10 foot pounds of torque should be applied to the clamp bolts or flange bolts to prevent breakage of the aluminum castings
Maximum Pressure Ratings:
SFKV6
SFKE44
SFKC4
| Part No. | OD Tube Size | Weight lbs. |
|---|---|---|
| 4-48GO | 4" | 3.5 |
| 5-48GO | 5" | 4.5 |
| 6-48GO | 6" | 5.5 |
| Part No. | OD Tube Size | Weight lbs. |
|---|---|---|
| SFTP2 | 2" | 0.1 |
| SFTP3 | 3" | 0.2 |
| SFTP4 | 4" | 0.4 |
| SFTP5 | 5" | 0.4 |
| SFTP6 | 6" | 0.5 |
| SFTP8 | 8" | 2 |
| Part No. | Companion Flange Size | OD | Weight lbs. |
|---|---|---|---|
| SFCF2 | 2" | 6 | 1.5 |
| SFCF3 | 3" | 7 | 2.5 |
| SFCF4 | 4" | 9 | 5 |
| SFCF5 | 5" | 10 | 5.5 |
| SFCF6 | 6" | 11 | 6 |
| SFCF8 | 8" | 13.5 | 12.5 |
| SFCF10 | 10" | 16 | 13 |
| SFCF12 | 12" | 19 | 18.5 |
| Part No. | PVC Pipe Size | Discharge Pipe Size | Weight lbs. |
|---|---|---|---|
| PSP 4-1 | 4" IPS | 1.0" | 2 |
| PSP 4-1¼ | 4" IPS | 1.25" | 1.5 |
| PSP 6-1 | 6" IPS | 1.0" | 3.5 |
| PSP 6-1¼ | 6" IPS | 1.25" | 3.5 |
| PSP 6-1½ | 6" IPS | 1.5" | 3.5 |
| PSP 6-2 | 6" IPS | 2.0" | 3.5 |
| PSP 8-1 | 8" IPS | 1.0" | 6 |
| PSP 8-2½ | 8" IPS | 2.5" | 6 |
| PSP 8-3 | 8" IPS | 3.0" | 5.5 |
| PSP 8-4 | 8" IPS | 4.0" | 5 |
These self-cleaning strainers are perfect for:
Lakes - Ponds - Streams
Debris clogging your pump's intake is eliminated when you install a Sure-Flo SCS2 self-cleaning strainer. Gone are those annoying trips into the water to scrub away leaves, algae, or aquatic plants. Because this screen is always clean, your pump can operate at maximum efficiency. It will provide all the water and pressure it was designed to deliver.
Only 35 PSI is required to operate the strainer.
A small amount of water is returned from the discharge line of the pump to the strainer. Inside, two special nozzles spray against the screen, causing it to revolve. Any debris (i.e. algae, aquatic plants, or leaves) attracted to the screen is blasted off every half revolution. Strainers operate in any position.
 |
 |
| Screen removed to show internal nozzles | SCS2 Plastic Screen |